logo
banner

News Details

Home > News >

Company news about Ruicom HTS6 Puts Traceable Angle Measurement Inside the CT Gantry — and Under the Patient Couch

Events
CONTACT US
Mrs. Tina Chen
86--13651423792
Contact Now

Ruicom HTS6 Puts Traceable Angle Measurement Inside the CT Gantry — and Under the Patient Couch

2026-11-16

latest company news about Ruicom HTS6 Puts Traceable Angle Measurement Inside the CT Gantry — and Under the Patient Couch  0

0.001° resolution over the full ±30° tilt envelope replaces potentiometer guesses with numbers a service protocol can trust

Ruicom today extended the reach of its HTS6 high-precision dual-axis tilt sensor into the imaging suite, targeting two jobs that decide scan quality: gantry tilt-angle feedback and patient couch return-to-horizontal. A CT gantry tilts up to ±30° for scan angulation, and every degree of unmeasured tilt propagates straight into the image geometry — while a couch that never quite returns to true horizontal quietly skews every study performed on it.

Why imaging equipment needs a measuring-grade tilt sensor

A potentiometer or a coarse switch cannot give the scan controller — or the service engineer — a traceable number. The HTS6 can: 0.001° resolution with 0.005° MAE in the small range, 0.0005 °/℃ zero drift and 16-bit signal processing hold the measurement steady across the full ±30° tilt envelope, installation after installation.

True angle from install to service

  • Gantry tilt-angle feedback — an HTS6 fixed inside the gantry, axis-aligned with the mechanical tilt axis, feeds the scan controller continuously, so the displayed tilt equals the true mechanical tilt.
  • Drift checks in preventive maintenance — the same signal flags tilt-axis drift before image-geometry complaints reach the customer.
  • Couch return-to-horizontal — a sensor on the couch base confirms every retraction lands back on a truly horizontal reference.
  • Installation & service levelling — a magnetic-base digital level verifies the suite's setup with a number on a screen, not a bubble.

Key specifications

  • Measurement axis: single / dual-axis
  • Range: ±10° / ±30° / ±60° / ±90°
  • Resolution: 0.001°
  • Accuracy: 0.005° (MAE, small range @25 ℃)
  • Zero drift: 0.0005 °/℃ (−40 ~ +85 ℃)
  • Response: 20 Hz (startup 0.5 s)
  • Interface: RS485 / RS232 / RS422 / TTL
  • Supply / protection: DC 9–36 V · IP67
  • Weight: ≤250 g (excl. cable)

From first installation to every preventive-maintenance visit, the HTS6 turns gantry tilt and couch levelling from an inspection anecdote into a traceable, recorded measurement.

banner
News Details
Home > News >

Company news about-Ruicom HTS6 Puts Traceable Angle Measurement Inside the CT Gantry — and Under the Patient Couch

Ruicom HTS6 Puts Traceable Angle Measurement Inside the CT Gantry — and Under the Patient Couch

2026-11-16

latest company news about Ruicom HTS6 Puts Traceable Angle Measurement Inside the CT Gantry — and Under the Patient Couch  0

0.001° resolution over the full ±30° tilt envelope replaces potentiometer guesses with numbers a service protocol can trust

Ruicom today extended the reach of its HTS6 high-precision dual-axis tilt sensor into the imaging suite, targeting two jobs that decide scan quality: gantry tilt-angle feedback and patient couch return-to-horizontal. A CT gantry tilts up to ±30° for scan angulation, and every degree of unmeasured tilt propagates straight into the image geometry — while a couch that never quite returns to true horizontal quietly skews every study performed on it.

Why imaging equipment needs a measuring-grade tilt sensor

A potentiometer or a coarse switch cannot give the scan controller — or the service engineer — a traceable number. The HTS6 can: 0.001° resolution with 0.005° MAE in the small range, 0.0005 °/℃ zero drift and 16-bit signal processing hold the measurement steady across the full ±30° tilt envelope, installation after installation.

True angle from install to service

  • Gantry tilt-angle feedback — an HTS6 fixed inside the gantry, axis-aligned with the mechanical tilt axis, feeds the scan controller continuously, so the displayed tilt equals the true mechanical tilt.
  • Drift checks in preventive maintenance — the same signal flags tilt-axis drift before image-geometry complaints reach the customer.
  • Couch return-to-horizontal — a sensor on the couch base confirms every retraction lands back on a truly horizontal reference.
  • Installation & service levelling — a magnetic-base digital level verifies the suite's setup with a number on a screen, not a bubble.

Key specifications

  • Measurement axis: single / dual-axis
  • Range: ±10° / ±30° / ±60° / ±90°
  • Resolution: 0.001°
  • Accuracy: 0.005° (MAE, small range @25 ℃)
  • Zero drift: 0.0005 °/℃ (−40 ~ +85 ℃)
  • Response: 20 Hz (startup 0.5 s)
  • Interface: RS485 / RS232 / RS422 / TTL
  • Supply / protection: DC 9–36 V · IP67
  • Weight: ≤250 g (excl. cable)

From first installation to every preventive-maintenance visit, the HTS6 turns gantry tilt and couch levelling from an inspection anecdote into a traceable, recorded measurement.