![]()
0.001° resolution catches the quiet creep phase of a few millimetres — so alarms can be raised while evacuation is still feasible
Ruicom today highlighted its STS6 standard-output tilt sensor as a compact foundation for slope stability monitoring and landslide early warning along roads, railways and residential hillsides. Buried or surface-mounted, STS sensors track the ground's rotation through the quiet phase — creep of a few millimetres that is easy to miss by eye — and can support debris-flow and landslide alarms while evacuation is still feasible.
Why slopes need in-place angle measurement
Steep slopes often fail slowly at first, then suddenly. Rainfall, excavation and erosion weaken them gradually, and the visible signs — cracks, bulges, leaning trees — tend to appear only a short time before failure. In-place STS6 sensors measure the rotation of the ground and of retaining structures continuously, catching that quiet creep phase so the acceleration that precedes failure is detected early — adding valuable time to the warning.
One sensor, four lines of defence
Key specifications
With 24-bit differential A/D conversion, fifth-order digital filtering and IP67 sealing for buried or surface installation, the STS6 turns slow ground movement into an early, actionable warning — before cracks become headlines.
![]()
0.001° resolution catches the quiet creep phase of a few millimetres — so alarms can be raised while evacuation is still feasible
Ruicom today highlighted its STS6 standard-output tilt sensor as a compact foundation for slope stability monitoring and landslide early warning along roads, railways and residential hillsides. Buried or surface-mounted, STS sensors track the ground's rotation through the quiet phase — creep of a few millimetres that is easy to miss by eye — and can support debris-flow and landslide alarms while evacuation is still feasible.
Why slopes need in-place angle measurement
Steep slopes often fail slowly at first, then suddenly. Rainfall, excavation and erosion weaken them gradually, and the visible signs — cracks, bulges, leaning trees — tend to appear only a short time before failure. In-place STS6 sensors measure the rotation of the ground and of retaining structures continuously, catching that quiet creep phase so the acceleration that precedes failure is detected early — adding valuable time to the warning.
One sensor, four lines of defence
Key specifications
With 24-bit differential A/D conversion, fifth-order digital filtering and IP67 sealing for buried or surface installation, the STS6 turns slow ground movement into an early, actionable warning — before cracks become headlines.