One screw-mounted sensor delivers dual-axis tilt with 0.0005° resolution plus FFT-based peak velocity and displacement in the 0.5–20 Hz band — streamed straight to the bridge health platform
Ruicom today introduced the VTS6D-G precision vibration inclinometer, an industrial vibration-plus-tilt combo sensor designed for low-frequency vibration and structural deformation monitoring on suspension and cable-stayed bridges. Screw-mounted on towers, girders and piers, the VTS6D-G streams data to the bridge health platform over RS485 / MODBUS RTU — with a built-in FFT unit that outputs peak velocity and displacement directly.
Why long-span bridges must be heard in the low band
Suspension and cable-stayed bridges are flexible structures: wind-induced vibration, traffic load waves and seismic response all sit in the 0.5–20 Hz low band. The natural frequencies of these bridges range from fractions of a Hz to a few Hz — wind sways the deck, and traffic walks waves along the girder. One VTS6D-G covers both needs: dual-axis tilt with 0.0005° resolution logs slow structural deformation, while the on-board FFT resolves vibration in the 0.5–20 Hz band without any external analyzer.
Four structural risks in one low band
Key specifications
With full-temperature-range calibration, single-surface screw mounting and professional analysis software included, the VTS6D-G gives bridge operators a compact way to track deflection, wind response, traffic loads and foundation movement — four structural risks in one low band, on one standard MODBUS chain.
One screw-mounted sensor delivers dual-axis tilt with 0.0005° resolution plus FFT-based peak velocity and displacement in the 0.5–20 Hz band — streamed straight to the bridge health platform
Ruicom today introduced the VTS6D-G precision vibration inclinometer, an industrial vibration-plus-tilt combo sensor designed for low-frequency vibration and structural deformation monitoring on suspension and cable-stayed bridges. Screw-mounted on towers, girders and piers, the VTS6D-G streams data to the bridge health platform over RS485 / MODBUS RTU — with a built-in FFT unit that outputs peak velocity and displacement directly.
Why long-span bridges must be heard in the low band
Suspension and cable-stayed bridges are flexible structures: wind-induced vibration, traffic load waves and seismic response all sit in the 0.5–20 Hz low band. The natural frequencies of these bridges range from fractions of a Hz to a few Hz — wind sways the deck, and traffic walks waves along the girder. One VTS6D-G covers both needs: dual-axis tilt with 0.0005° resolution logs slow structural deformation, while the on-board FFT resolves vibration in the 0.5–20 Hz band without any external analyzer.
Four structural risks in one low band
Key specifications
With full-temperature-range calibration, single-surface screw mounting and professional analysis software included, the VTS6D-G gives bridge operators a compact way to track deflection, wind response, traffic loads and foundation movement — four structural risks in one low band, on one standard MODBUS chain.